10 Mm Dimple Drainage Sheet Drainage Board Membrane For Exterior Wall
Product introduction
Drainage cell is the lightweight three dimensional geocomposite with flat back which is pressed against an underground structure used for subsurface water management method.
Drainage cell is lightweight, easy to use and cost effective when compared to traditional drainage methods, and it is the most advanced and versatile geo-composite product suitable for all your horizontal and vertical drainage applications such as roof garden drainage, landscape, terraces and patios under pavers, subterranean building protection, etc.
Technical parameter
|
|
|
|
|
Tension at 10% elongation (N/100mm) ≥
|
|
Maximum pulling force (N/100mm) ≥
|
|
|
|
|
|
|
|
|
|
Maximum strength when compression rate is 20%/KPa ≥
|
|
Extreme compression performance
|
|
Low temperature flexibility
|
|
|
|
Tensile retention at 10% elongation≥
|
|
Maximum tensile retention rate/(N/100mm) /% ≥
|
|
Elongation at break retention rate /% ≥
|
|
Maximum strength retention rate when the compression rate is 20% ≥
|
|
Extreme compression performance
|
|
Low temperature flexibility
|
|
Longitudinal water flow (test pressure 150KPa) (cm²/s) ≥
|
|
Product Application Range
1. Greening project: the garage roof greening, roof garden, vertical greening, roof greening, football pitches, golf course, etc.
2. Municipal engineering: airport, road embankment, subway, tunnel, landfill, etc.
3. Construction: the upper or lower building foundation, inside and outside the basement wall, floor and roof, roof seepage
control and heat insulation layer, etc.
4. Water conservancy project: the reservoir seepage water, reservoir, lake water seepage control, etc.
5. Traffic engineering: highway, railway basement, roadbed, dam and slope protection layer, etc.
Product Tags:
|
|
10 Mm Dimple Drainage Sheet Drainage Board Membrane For Exterior Wall Images
|
